Stonecontact.com offers a wide range of chainsaw stone cutting machines and other cutters in multiple sizes and designs. Quarry Chain Saw Machines are designed for use in medium hardness stone quarries such as marble, limestone, sandstone, tuff stone etc. But it can also be used in the extraction of hard rocks such as granite from the quarry with the suitable cutting segments for the hardness of the stone.
Quarry Chain Saw Machines can also cut on uneven ground, like cutting on 15 degree slope and also can cut stone blocks without water.
Quarry Chain Saw Machines can blindly cut, don't need to drill ahead of time or do any early work. They can save auxiliary time and large air compressor equipment. Cutting surface is very smooth, it can improve the condition of mines, and the blocks are square and don't need to be trimmed again.
Quarry Chain Saw Machines are quiet and safe in operation, have a good working environment and low labor intensity, only need one person to operate.
Quarry Chain Saw Machines have high cutting efficiency while continuously cutting, in the case of 3000mm cutting depth type, 10 hours continuously working can cut 60 square meters of cutting surface. Cutting cost is lower than that of diamond wire saw machines.
Chain Saw Model GU50-SC is a compact version for tunnel extraction work. By setting the cutting depth in automatic mode the machine makes vertical and horizontal cuts against the tunnel face. It is self-propelled on a track and radio-controlled, and hence completely autonomous in its movements. Only one operator is sufficient to operate the machine. This model can run cuts up to 1.7 metres in depth. Technical Specifications Total installed power: 45 KW Overall weight: 14,000 Kg Hydraulic tank ca
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
Chain Saw Model GU50-SC is a compact version for tunnel extraction work. By setting the cutting depth in automatic mode the machine makes vertical and horizontal cuts against the tunnel face. This is self-propelled on caterpillar tracks and completely autonomous in movement. Only one operator is sufficient to operate the machine. This model can run cuts up to 1.7 metres deep. Technical Specifications Total installed power 56 KW Electrical power supply 400V/50 Hz Machine weight Kg. 16,000 Hydraul
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
Chain Saw Model SV50 is a special version of the family of self-propelled machines for tunnel excavations. This machine is designed to perform rear cutting of the blocks whilst the tunnelling advances forwards. The depth of the rear cut can reach up to 1.7 metres. Technical Specifications Total installed power: 30 kW Hydrostatic transmission with variable flow pump Weight: 8,000 Kg Useful for cuts of up to 1.60 metres (on both the right and left hand sides) Hydraulic tank capacity: 150 litres Ch
Chain Saw Model GU50-SC is a compact version for tunnel extraction work. By setting the cutting depth in automatic mode the machine makes vertical and horizontal cuts against the tunnel face. It is self-propelled on a track and radio-controlled, and hence completely autonomous in its movements. Only one operator is sufficient to operate the machine. This model can run cuts up to 1.7 metres in depth. Technical Specifications Total installed power: 45 KW Overall weight: 14,000 Kg Hydraulic tank ca
Stonecontact.com offers a wide range of chainsaw stone cutting machines and other cutters in multiple sizes and designs. Quarry Chain Saw Machines are designed for use in medium hardness stone quarries such as marble, limestone, sandstone, tuff stone etc. But it can also be used in the extraction of hard rocks such as granite from the quarry with the suitable cutting segments for the hardness of the stone.
Quarry Chain Saw Machines can also cut on uneven ground, like cutting on 15 degree slope and also can cut stone blocks without water.
Quarry Chain Saw Machines can blindly cut, don't need to drill ahead of time or do any early work. They can save auxiliary time and large air compressor equipment. Cutting surface is very smooth, it can improve the condition of mines, and the blocks are square and don't need to be trimmed again.
Quarry Chain Saw Machines are quiet and safe in operation, have a good working environment and low labor intensity, only need one person to operate.
Quarry Chain Saw Machines have high cutting efficiency while continuously cutting, in the case of 3000mm cutting depth type, 10 hours continuously working can cut 60 square meters of cutting surface. Cutting cost is lower than that of diamond wire saw machines.
Ask a Question
Could not find the answer you need? Ask about Sawmill Machine For Tunnel.
Can a quarry chain saw machine cut granite?View answer⌄
Asked by Visitor
Quarry chain saw machines are designed for use in medium hardness stone quarries but with the suitable cutting segments they also can be used in granite quarries.
Italy
